| Wall Mountable
Operator Interface |
 |
This
is a display and sensor adjustment interface that
mounts on a wall local to the sensor. |
| |
|
|
| Hand Held
Operator Interface |
| |
This is a hand held
version of the wall operator interface |
| |
|
|
| PSC MTioServer®
Software |
 |
| |
This is a PC program
that allows users to interface with the sensor. |
| |
|
|
| Interconnecting
Cables |
| |
The Wall Mountable
Operator Interface may be mounted up to 300 feet
(100 meters) from the sensor. Standard lengths
held in stock are 10-ft, 20 ft and 50-ft. (3,
6, 15 meters) |
| |
|
|
| Remote Sampling
and Display Unit |
 |
| |
For users that require
a remote (>100 meters) display of the sensor's
moisture reading. |
| |
|
|
| Water Cooling
Panel |
| |
When the sensor
is required to be installed in environments at
temperatures higher that 120F (50C) it needs to
be fitted with a water cooling panel. |
| |
|
|
| Vortec Air
Cooling Panel |
| |
This is an alternative
cooling system to the water-cooling panel that
provides a cold air stream. |
| |
|
|
| Calibration
Check Standard |
| |
Calibration Check
Standards is a double sided standard that absorbs
NIR energy mimicking a low and high moisture sample.
It is used as a periodic check of the sensor's
calibration stability. |
| |
|
|
| Sensor Window
Air Purge |
| |
This is needed only
in very dusty environments to clean the sensor's
window. |
| |
|
|
| Base &
Stand |
| |
Is a bench mountable
stand that allows the sensor to be used on a table
top. |
| |
|
|
| Product
Loss Sensors |
| |
This is used with
the sensor so that readings may be made on products
that have gaps in the flowing line of product. |
| |
|
|
| Snorkel
Sampler and Controller |
| |
This is used so
that readings may be made on products that are
falling vertically down ducts. |
| |
|
|
| Sample Turntable
with Test Initiate But |
| |
This option allows
any online sensor to operate as a Bench Top unit. |
| |
|
|
| Non Contact
Product Temperature Sensor |
| |
When required, this
product temperature reading may be used to compensate
the moisture reading of the MCT Moisture Transmitter. |
| |
|
|
| Ethernet
Interface Board |
| |
This option allows
the sensor to communicate to a host PC using Ethernet. |
| |
|
|
| DeviceNet
& Profibus Interface Boards |
| |
These boards allows
the sensor to communicate to a host PC using Devicenet
or Profibus. |
| |
|
|
| Temperature
Input Interface Board |
| |
This option board
allows the user to input a mA or V signal from
a temperature-measuring device. |
| |
