Process Sensors Corporation Transmitters are
used routinely in the manufacture of chemicals.
The Sensor's are often located after the
dryers, extruders and chill rolls. Some fine
powders are measured by using an
Automatic
Sample Probe which is attached
to the sensor. Generally, the Transmitter
is placed over a conveyor, usually at a distance
of about 12 inches from the product.
When installing a Sensor, it is important
to keep environmental temperature in mind,
especially after a dryer outlet. For example,
with the application of rubber crumb. If the
temperature is above 60°C, it may be necessary
to cool the Transmitter with air or water.
Calibrations for most chemicals have already
been determined by Process Sensors Corporation
so that the Transmitter is delivered pre-calibrated.
Typical accuracies for moisture of chemicals
are ± .2 compared to standard loss
on drying.
For more detailed information regarding chemicals
and their applications, please
fill
out the following form. |
